Last Updated: November 12, 2026
Quick Summary
Residential siding installation cost in 2026 typically ranges from $8,000 to $30,000 for a full replacement, depending on house size, material and labor. Vinyl is usually the cheapest option, at about $7.32 to $12.51 per square foot installed. Get itemized bids to compare accurately.
- Most published 2026 guides put a full replacement between $8,000 and $30,000.
- Vinyl siding installs for about $7.32 to $12.51 per square foot.
- Steel and aluminum siding typically cost roughly $8 to $16 per square foot installed.
- Contractors price siding by wall area, not the home’s floor area.
- Bids that omit tear-off, disposal or sheathing repairs often rise through change orders.
Table of Contents
- Residential Siding Installation Cost 2026: Typical Price Ranges
- Residential Siding Installation Cost 2026 Per Square Foot by Material
- Vinyl Residential Siding Installation Cost 2026 Compared With Other Options
- How Much Does Siding Cost for a 2,000 Sq Ft House?
- Labor Cost to Install Siding Per Square Foot and What Your Quote Should Include
- Getting a Clear Siding Quote and Your Next Step With Atlanta Roof ProZ
- Frequently Asked Questions
Siding replacement is one of the bigger exterior projects a US homeowner can take on, and the quoted price can swing widely from one bid to the next. Most published 2026 guides put a full replacement somewhere between $8,000 and $30,000, according to This Old House siding replacement cost guide. That spread is why a single number rarely tells you what your own project will cost. This guide walks through the ranges, materials and quote details that matter most.
Residential Siding Installation Cost 2026: Typical Price Ranges
Most homeowners should expect a total that depends on house size, material and what the old siding looks like underneath. Estimates from different sources are not directly comparable, because each one assumes different scope and labor. Angi reports an average siding installation project of $11,579, within a typical range of $5,559 to $17,727, with materials and labor included in its figure, per Angi siding cost estimates. Treat that as a starting reference, not a bid.
Check whether any figure you read includes tear-off, disposal and wall repairs before comparing it to your quote.
Residential Siding Installation Cost 2026 Per Square Foot by Material
Per-square-foot pricing is the clearest way to compare materials, but only if you know what the number includes. Basic vinyl installation runs about $7.32 to $12.51 per square foot, according to Homewyse vinyl siding installation calculator. Steel and aluminum siding typically cost roughly $8 to $16 per square foot installed, based on Mint Exteriors siding material guide. Ask each bidder for a line-item rate rather than a single blended number. Wood siding varies widely with species, profile and finish, and it carries the highest ongoing maintenance burden of the group.
A per-square-foot figure is only as good as the square footage behind it, and this is where most comparisons fall apart. Contractors price siding by wall area, not by the home’s floor area. A 2,000-square-foot single-story ranch and a 2,000-square-foot two-story colonial have very different wall areas, and the two-story home usually has more corners, gables and openings to trim around. Measure the actual wall area, subtract windows and doors, and confirm in writing whether your contractor’s square footage includes gables, soffits and fascia or only the field panels.
Watch out: some published per-square-foot rates include tear-off, house wrap and trim, while others cover only the siding panels and basic labor. Two bids that look $2 per square foot apart may actually be pricing completely different scopes.
| Material | Typical Installed Cost (per sq ft) | Pros | Cons | Best For |
|---|---|---|---|---|
| Vinyl | $7.32 to $12.51 | Lowest cost, low maintenance | Can look thin, may crack in hail | Budget-focused projects |
| Steel or aluminum | $8 to $16 | Durable against wind, hail and fire | Dents, higher cost than vinyl | Storm-prone areas |
| Fiber cement | Higher than vinyl (confirm with bids) | Long-lasting, strong curb appeal | Heavier, more labor | Long-term ownership |
| Wood | Varies widely | Classic look | High maintenance | Historic or custom homes |
Per-square-foot rates for new construction and replacement can differ because of the scope involved, so confirm what each quote includes before comparing them.
Vinyl and steel/aluminum siding installed cost per square foot
Vinyl Residential Siding Installation Cost 2026 Compared With Other Options
Vinyl is usually the lowest-cost option. Vinyl is light, easy to install and needs little maintenance, but it can look less substantial than fiber cement and may fade or crack in extreme heat or hail.
Fiber cement and engineered wood usually cost more up front but may last longer and resist moisture and pests better. The right choice depends on your climate, your budget and how long you plan to stay in the house.
| Material | Typical Installed Cost (per sq ft) | Pros | Cons | Best For |
|---|---|---|---|---|
| Vinyl | $7.32 to $12.51 | Lowest cost, low maintenance | Can look thin, may crack in hail | Budget-focused projects |
| Steel or aluminum | $8 to $16 | Durable against wind, hail and fire | Dents, higher cost than vinyl | Storm-prone areas |
| Fiber cement | Higher than vinyl (confirm with bids) | Long-lasting, strong curb appeal | Heavier, more labor | Long-term ownership |
| Wood | Varies widely | Classic look | High maintenance | Historic or custom homes |
How Much Does Siding Cost for a 2,000 Sq Ft House?
The total cost for a 2,000-square-foot house depends on material, wall area and scope of work.
Your final number will shift with stories, trim, the number of corners and openings, and the condition of the sheathing underneath. A two-story home with many dormers costs more than a simple single-story ranch of the same square footage.
Labor Cost to Install Siding Per Square Foot and What Your Quote Should Include
Labor is often the largest share of a siding bill, and it varies by region, crew and, most of all, by scope. SidingCosts.com lists labor at $40 to $75 per hour, per SidingCosts.com labor rate estimates. Hourly rates are a useful benchmark, but they do not tell you how many hours your project will take. Ask every bidder to break out labor separately from materials, and ask how many crew-days they have budgeted so you can compare like with like.

Scope changes labor more than any other variable. A partial replacement, one wall, a gable end, or the section around a room addition, carries setup, mobilization and trim-matching costs that get spread over a smaller area, so the per-square-foot labor rate often looks higher than on a full replacement. Full replacement spreads setup across the whole house, but it adds tear-off, disposal and the wall repairs that only become visible once the old siding is down. New construction skips tear-off and disposal entirely, which is why new-build rates are not a fair comparison for a replacement bid.
A transparent estimate separates the following line items so you can compare bids consistently:
- Materials, with brand, profile, color and quantity in squares
- Labor, with crew size and estimated days
- Tear-off and disposal of existing siding
- Repair allowance for damaged sheathing or wall board (ask whether it is a fixed allowance or time-and-materials)
- House wrap, flashing and trim
- Permits, if your municipality requires them
- Cleanup and warranty terms
Watch out: bids that omit tear-off, disposal or a sheathing repair allowance often look cheapest until change orders arrive. Ask each contractor to list exclusions in writing, and confirm whether the repair allowance is capped or open-ended.
When you compare bids, line up the scopes side by side rather than the totals. A bid that is $3,000 lower may simply be missing tear-off, house wrap or trim. Request at least three itemized bids, confirm what each one excludes, and treat any bid far below the others as a scope question first and a bargain second.
Getting a Clear Siding Quote and Your Next Step With Atlanta Roof ProZ
Start by measuring your wall area, deciding on a material and asking for itemized bids that list exclusions. If storm or hail damage is part of the picture, document it before work begins. Atlanta Roof ProZ offers free inspections and can help homeowners in the Atlanta area navigate insurance claims for exterior damage. Pricing depends on the size of the home, material selection and site conditions, so the most accurate figure comes from an in-person assessment. Request your estimate today and we will walk through the numbers with you.
Frequently Asked Questions
How much does residential siding installation cost in 2026?
Published 2026 estimates generally place a full replacement between $8,000 and $30,000, depending on house size, material and labor. Vinyl sits at the lower end, while steel, aluminum and fiber cement cost more. Get an itemized bid for an accurate figure.
Is vinyl siding the cheapest option?
Vinyl is usually the lowest-cost material on a per-square-foot basis. Its total cost still depends on the condition of the existing wall and the scope of repairs.
What should a siding quote include?
A complete quote lists materials, tear-off and disposal, sheathing repairs, house wrap, flashing, trim, permits, cleanup and warranty terms. Anything left off should be confirmed in writing as an exclusion.
Does siding replacement increase home value?
Siding upgrades can improve curb appeal and protect the structure. The exact effect on resale value depends on your market, so check with a local real estate professional.
Frequently Asked Questions
How much does it cost to side a 2,000 sq ft house?
The cost of a full siding replacement on a 2,000-square-foot home varies with material and scope. Material choice, wall area after deductions for windows and doors, removal of old siding, and trim work all move the final number. Ask each contractor for an itemized quote so you can compare materials, labor and disposal line by line.
What is the average cost to side a 1,500 sq ft house?
No single published average for a 1,500-square-foot home was found in the supplied research. Per-square-foot figures are more useful for estimating a smaller home. Measure your siding area, not total floor area, and request itemized bids to get an accurate planning figure.
How much does siding cost per square foot in 2026?
Published 2026 guides show a wide spread. Per-square-foot figures vary with material, site conditions and project scope, so treat any single figure as a starting point rather than a quote.
How much does labor cost to install siding per square foot?
Labor typically makes up a large share of the installed price. Labor cost depends on how many hours a crew needs for your home, which is influenced by wall height, number of stories, trim complexity and whether old siding must be torn off first. Ask contractors to break labor out separately from materials so you can see how the per-square-foot price was built.